1-1/8 INTERNAL RETAINING RING (#N5000-112)

RNGI112 Specifications

• Type: Housing Ring
• Diameter: 1-1/8
• Measure: Inch
• Lug Height: 0.1800 in
• Inch or Metric: Inch
• Thickness: 0.0500 in
• Groove Diameter: 1.2000 in
• Clearance Diameter Released in Groove: 0.8150 in
• Housing Diameter: 1.1250 in
• Maximum Section: 0.1160 in
• Thickness Tolerance: ±.002
• Groove Width: 0.0600 in
• Free Diameter: 1.2490 in
• Type (Rings and Collars): Internal
• Minimum Section: 0.0570 in
• Hole Diameter Tolerance: +.015/-.002
• Illustration: PHL-HO
• Material (Rings and Collars): Carbon Spring Steel
• Groove Depth: 0.0400 in
• Hardness: HRC 47-52
• Allowable Corner Radii: 0.0470 in
• Gap Width Minimum: 0.2320 in
• Hole Diameter: 0.0780 in
• Lug Height Tolerance: ±.005
• Groove Diameter to Shaft Concentricity: 0.0050 in
• Edge Margin: 0.1080 in
• Housing Diameter Fraction: 1-1/8 in
• Maximum Section Tolerance: ±.006
• Finish (Rings and Collars): Phosphate
• Maximum Thrust Load: 2400.0000 Pound-Force
• Free Diameter Tolerance: +.025/-.020
• Allowable Corner Chamfers: 0.0360 in
• Clearance Diameter Compressed in Housing: 0.7450 in
• Minimum Section Tolerance: ±.006
• Style: Stamped