2-3/4" EXTERNAL RETAINING RING (#5100-275)

RNGE275 Specifications

• Type: Snap Ring
• Diameter: 2-3/4
• Measure: Inch
• Lug Height: 0.3240 in
• Inch or Metric: Inch
• Shaft Diameter: 2.7500 in
• Thickness: 0.0930 in
• Groove Diameter: 2.6000 in
• Clearance Diameter Released in Groove: 3.3380 in
• Material (Snap Rings): Carbon Spring Steel
• Maximum Section: 0.2480 in
• Thickness Tolerance: ±.003
• Groove Width: 0.1000 in
• Free Diameter: 2.5400 in
• Minimum Section: 0.1310 in
• Hole Diameter Tolerance: +.015/-.002
• Illustration: PHL-SH
• Groove Depth: 0.0700 in
• Hardness: HRC 47-52
• Allowable Corner Radii: 0.1120 in
• Finish (Snap Rings): Phosphate
• Hole Diameter: 0.1250 in
• Lug Height Tolerance: ±.005
• Duty: Standard Duty
• Shaft Diameter Fraction: 2-3/4 in
• Groove Diameter to Shaft Concentricity: 0.0060 in
• Edge Margin: 0.2220 in
• Type (Snap Rings): Snap Rings External
• Maximum Section Tolerance: ±.007
• Clearance Diameter Expanded Over Shaft: 3.4780 in
• Maximum Thrust Load: 7350.0000 Pound-Force
• Free Diameter Tolerance: +.020/-.030
• Allowable Corner Chamfers: 0.0670 in
• Minimum Section Tolerance: ±.007
• Style: Stamped