2-1/2" EXTERNAL RETAINING RING (#5100-250)

RNGE250 Specifications

• Type: Snap Ring
• Diameter: 2-1/2
• Measure: Inch
• Lug Height: 0.2920 in
• Inch or Metric: Inch
• Shaft Diameter: 2.5000 in
• Thickness: 0.0780 in
• Groove Diameter: 2.3600 in
• Clearance Diameter Released in Groove: 3.0280 in
• Material (Snap Rings): Carbon Spring Steel
• Maximum Section: 0.2320 in
• Thickness Tolerance: ±.003
• Groove Width: 0.0900 in
• Free Diameter: 2.3100 in
• Minimum Section: 0.1220 in
• Hole Diameter Tolerance: +.015/-.002
• Illustration: PHL-SH-250-20170330
• Groove Depth: 0.0700 in
• Hardness: HRC 47-52
• Allowable Corner Radii: 0.1040 in
• Finish (Snap Rings): Phosphate
• Hole Diameter: 0.1250 in
• Lug Height Tolerance: ±.005
• Duty: Standard Duty
• Shaft Diameter Fraction: 2-1/2 in
• Groove Diameter to Shaft Concentricity: 0.0060 in
• Edge Margin: 0.2100 in
• Type (Snap Rings): Snap Rings External
• Maximum Section Tolerance: ±.007
• Clearance Diameter Expanded Over Shaft: 3.1680 in
• Maximum Thrust Load: 5000.0000 Pound-Force
• Free Diameter Tolerance: +.015/-.025
• Allowable Corner Chamfers: 0.0620 in
• Minimum Section Tolerance: ±.007
• Style: Stamped