2-1/4" EXTERNAL RETAINING RING (#5100-225)

RNGE225 Specifications

• Type: Snap Ring
• Series: 5100
• Diameter: 2-1/4
• Measure: Inch
• Allowable Corner Chamfers: 0.0600 in
• Allowable Corner Radii: 0.1000 in
• Clearance Diameter Released in Groove: 2.7560 in
• Edge Margin: 0.1950 in
• Free Diameter: 2.0800 in
• Free Diameter Tolerance: +.015/-.025
• Groove Depth: 0.0700 in
• Groove Diameter: 2.1200 in
• Groove Diameter to Shaft Concentricity: 0.0060 in
• Groove Width: 0.0900 in
• Hardness: HRC 47-52
• Illustration: PHL-SH
• Inch or Metric: Inch
• Maximum Thrust Load: 5000.0000 Pound-Force
• Shaft Diameter: 2.2500 in
• Shaft Diameter Fraction: 2-1/4 in
• Style: Stamped
• Thickness: 0.0780 in
• Clearance Diameter Expanded Over Shaft: 2.8760 in
• Duty: Standard Duty
• Finish (Snap Rings): Phosphate
• Hole Diameter: 0.1250 in
• Hole Diameter Tolerance: +.015/-.002
• Lug Height: 0.2800 in
• Lug Height Tolerance: .005
• Material (Snap Rings): Carbon Spring Steel
• Maximum Section: 0.2200 in
• Minimum Section: 0.1160 in