2" EXTERNAL RETAINING RING (#5100-200)

RNGE200 Specifications

• Type: Snap Ring
• Diameter: 2
• Measure: Inch
• Lug Height: 0.2620 in
• Inch or Metric: Inch
• Shaft Diameter: 2.0000 in
• Thickness: 0.0620 in
• Groove Diameter: 1.8900 in
• Clearance Diameter Released in Groove: 2.4860 in
• Material (Snap Rings): Carbon Spring Steel
• Maximum Section: 0.2040 in
• Thickness Tolerance: ±.003
• Groove Width: 0.0700 in
• Free Diameter: 1.8500 in
• Minimum Section: 0.1080 in
• Hole Diameter Tolerance: +.015/-.002
• Illustration: PHL-SH
• Groove Depth: 0.0600 in
• Hardness: HRC 47-52
• Allowable Corner Radii: 0.0960 in
• Finish (Snap Rings): Phosphate
• Hole Diameter: 0.1250 in
• Lug Height Tolerance: ±.004
• Duty: Standard Duty
• Shaft Diameter Fraction: 2 IN
• Groove Diameter to Shaft Concentricity: 0.0050 in
• Edge Margin: 0.1710 in
• Type (Snap Rings): Snap Rings External
• Maximum Section Tolerance: ±.006
• Clearance Diameter Expanded Over Shaft: 2.5960 in
• Maximum Thrust Load: 3000.0000 Pound-Force
• Free Diameter Tolerance: +.013/-.020
• Allowable Corner Chamfers: 0.0570 in
• Minimum Section Tolerance: ±.006
• Style: Stamped