1-3/4" EXTERNAL RETAINING RING (#5100-175)

RNGE175 Specifications

• Type: Snap Ring
• Diameter: 1-3/4
• Measure: Inch
• Lug Height: 0.2370 in
• Inch or Metric: Inch
• Shaft Diameter: 1.7500 in
• Thickness: 0.0620 in
• Groove Diameter: 1.6500 in
• Clearance Diameter Released in Groove: 2.2100 in
• Material (Snap Rings): Carbon Spring Steel
• Maximum Section: 0.1880 in
• Thickness Tolerance: ±.003
• Groove Width: 0.0700 in
• Free Diameter: 1.6200 in
• Minimum Section: 0.1010 in
• Hole Diameter Tolerance: +.015/-.002
• Illustration: PHL-SH
• Groove Depth: 0.0500 in
• Hardness: HRC 47-52
• Allowable Corner Radii: 0.0910 in
• Finish (Snap Rings): Phosphate
• Hole Diameter: 0.1250 in
• Lug Height Tolerance: ±.004
• Duty: Standard Duty
• Shaft Diameter Fraction: 1-3/4 in
• Groove Diameter to Shaft Concentricity: 0.0050 in
• Edge Margin: 0.1500 in
• Type (Snap Rings): Snap Rings External
• Maximum Section Tolerance: ±.006
• Clearance Diameter Expanded Over Shaft: 2.3100 in
• Maximum Thrust Load: 3000.0000 Pound-Force
• Free Diameter Tolerance: +.013/-.020
• Allowable Corner Chamfers: 0.0540 in
• Minimum Section Tolerance: ±.006
• Style: Stamped