1-1/4 EXTERNAL RETAINING RING (#5100-125)

RNGE125 Specifications

• Type: Snap Ring
• Series: 5100
• Diameter: 1-1/4
• Measure: Inch
• Allowable Corner Chamfers: 0.0410 in
• Allowable Corner Radii: 0.0680 in
• Clearance Diameter Released in Groove: 1.6200 in
• Edge Margin: 0.1110 in
• Free Diameter: 1.1600 in
• Free Diameter Tolerance: +.010/-.015
• Groove Depth: 0.0400 in
• Groove Diameter: 1.1800 in
• Groove Diameter to Shaft Concentricity: 0.0050 in
• Groove Width: 0.0600 in
• Hardness: HRC 47-52
• Illustration: PHL-SH
• Inch or Metric: Inch
• Maximum Thrust Load: 1950.0000 Pound-Force
• RPM Limits: 17000 rpm
• Shaft Diameter: 1.2500 in
• Shaft Diameter Fraction: 1-1/4 in
• Style: Stamped
• Thickness: 0.0500 in
• Clearance Diameter Expanded Over Shaft: 1.6900 in
• Duty: Standard Duty
• Finish (Snap Rings): Phosphate
• Hole Diameter: 0.0780 in
• Hole Diameter Tolerance: +.015/-.002
• Lug Height: 0.1830 in
• Material (Snap Rings): Carbon Spring Steel
• Maximum Section: 0.1400 in
• Maximum Section Tolerance: .006
• Minimum Section: 0.0760 in
• Minimum Section Tolerance: .006