15/16 EXTERNAL RETAINING RING (#5100-93)

RNGE093 Specifications

• Type: Snap Ring
• Diameter: 15/16
• Measure: Inch
• Lug Height: 0.1660 in
• Inch or Metric: Inch
• Shaft Diameter: 0.9380 in
• Thickness: 0.0420 in
• Groove Diameter: 0.8820 in
• Clearance Diameter Released in Groove: 1.2900 in
• Material (Snap Rings): Carbon Spring Steel
• Maximum Section: 0.1100 in
• Thickness Tolerance: ±.002
• Groove Width: 0.0460 in
• Free Diameter: 0.8670 in
• Minimum Section: 0.0630 in
• Hole Diameter Tolerance: +.015/-.002
• Illustration: PHL-SH
• RPM Limits: 21500 rpm
• Groove Depth: 0.0300 in
• Hardness: HRC 47-53
• Allowable Corner Radii: 0.0550 in
• Finish (Snap Rings): Phosphate
• Hole Diameter: 0.0780 in
• Lug Height Tolerance: ±.004
• Duty: Standard Duty
• Shaft Diameter Fraction: 15/16 in
• Groove Diameter to Shaft Concentricity: 0.0040 in
• Edge Margin: 0.0840 in
• Type (Snap Rings): Snap Rings External
• Maximum Section Tolerance: ±.005
• Clearance Diameter Expanded Over Shaft: 1.3400 in
• Maximum Thrust Load: 1340.0000 Pound-Force
• Free Diameter Tolerance: +.005/-.010
• Allowable Corner Chamfers: 0.0330 in
• Minimum Section Tolerance: ±.005
• Style: Stamped