7/8 EXTERNAL RETAINING RING (#5100-87)

RNGE087 Specifications

• Type: Snap Ring
• Material (Snap Rings): Carbon Spring Steel
• Hardness: HRC 47-53
• Inch or Metric: Inch
• Illustration: PHL-SH
• Finish (Snap Rings): Phosphate
• Type (Snap Rings): Snap Rings External
• Style: Stamped
• Duty: Standard Duty
• Thickness Tolerance: ±.002
• Lug Height Tolerance: ±.004
• Maximum Section Tolerance: ±.005
• Minimum Section Tolerance: ±.005
• Groove Diameter to Shaft Concentricity: 0.0040 in
• Free Diameter Tolerance: +.005/-.010
• Hole Diameter Tolerance: +.010/-.002
• Groove Depth: 0.0300 in
• Allowable Corner Chamfers: 0.0310 in
• Thickness: 0.0420 in
• Groove Width: 0.0460 in
• Allowable Corner Radii: 0.0510 in
• Hole Diameter: 0.0520 in
• Minimum Section: 0.0570 in
• Edge Margin: 0.0810 in
• Maximum Section: 0.1040 in
• Lug Height: 0.1370 in
• Free Diameter: 0.8100 in
• Groove Diameter: 0.8210 in
• Shaft Diameter: 0.8750 in
• Diameter: 7/8
• Shaft Diameter Fraction: 7/8 in
• Clearance Diameter Released in Groove: 1.1600 in
• Clearance Diameter Expanded Over Shaft: 1.2100 in
• Maximum Thrust Load: 1340.0000 Pound-Force
• RPM Limits: 23000 rpm
• Measure: Inch