5/8" EXTERNAL RETAINING RING (#5100-62)

RNGE062 Specifications

• Type: Snap Ring
• Diameter: 5/8
• Measure: Inch
• Lug Height: 0.1100 in
• Inch or Metric: Inch
• Shaft Diameter: 0.6250 in
• Thickness: 0.0350 in
• Groove Diameter: 0.5880 in
• Clearance Diameter Released in Groove: 0.8700 in
• Material (Snap Rings): Carbon Spring Steel
• Maximum Section: 0.0800 in
• Thickness Tolerance: ±.002
• Groove Width: 0.0390 in
• Free Diameter: 0.5790 in
• Minimum Section: 0.0450 in
• Hole Diameter Tolerance: +.010/-.002
• Illustration: PHL-SH
• RPM Limits: 30000 rpm
• Groove Depth: 0.0200 in
• Hardness: HR30N 66-71
• Allowable Corner Radii: 0.0420 in
• Finish (Snap Rings): Phosphate
• Hole Diameter: 0.0470 in
• Lug Height Tolerance: ±.003
• Duty: Standard Duty
• Shaft Diameter Fraction: 5/8 in
• Groove Diameter to Shaft Concentricity: 0.0040 in
• Edge Margin: 0.0550 in
• Type (Snap Rings): Snap Rings External
• Maximum Section Tolerance: ±.004
• Clearance Diameter Expanded Over Shaft: 0.9000 in
• Maximum Thrust Load: 910.0000 Pound-Force
• Free Diameter Tolerance: +.005/-.010
• Allowable Corner Chamfers: 0.0250 in
• Minimum Section Tolerance: ±.004
• Style: Stamped