7/16" EXTERNAL RETAINING RING (#5100-43)

RNGE043 Specifications

• Type: Snap Ring
• Diameter: 7/16
• Measure: Inch
• Lug Height: 0.0880 in
• Inch or Metric: Inch
• Shaft Diameter: 0.4380 in
• Thickness: 0.0250 in
• Groove Diameter: 0.4120 in
• Clearance Diameter Released in Groove: 0.6400 in
• Material (Snap Rings): Carbon Spring Steel
• Maximum Section: 0.0550 in
• Thickness Tolerance: ±.002
• Groove Width: 0.0290 in
• Free Diameter: 0.3950 in
• Minimum Section: 0.0330 in
• Hole Diameter Tolerance: +.010/-.002
• Illustration: PHL-SH
• RPM Limits: 50000 rpm
• Groove Depth: 0.0100 in
• Hardness: HR30N 69.5-73
• Allowable Corner Radii: 0.0290 in
• Finish (Snap Rings): Phosphate
• Hole Diameter: 0.0410 in
• Lug Height Tolerance: ±.003
• Duty: Standard Duty
• Shaft Diameter Fraction: 7/16 in
• Groove Diameter to Shaft Concentricity: 0.0020 in
• Edge Margin: 0.0390 in
• Type (Snap Rings): Snap Rings External
• Maximum Section Tolerance: ±.003
• Clearance Diameter Expanded Over Shaft: 0.6600 in
• Maximum Thrust Load: 470.0000 Pound-Force
• Free Diameter Tolerance: +.002/-.005
• Allowable Corner Chamfers: 0.0180 in
• Minimum Section Tolerance: ±.003
• Style: Stamped