5/16" EXTERNAL RETAINING RING (#5100-31)

RNGE031 Specifications

• Type: Snap Ring
• Series: 5100
• Diameter: 5/16
• Measure: Inch
• Allowable Corner Chamfers: 0.0120 in
• Allowable Corner Radii: 0.0200 in
• Clearance Diameter Released in Groove: 0.5200 in
• Edge Margin: 0.0330 in
• Free Diameter: 0.2810 in
• Free Diameter Tolerance: +.002/-.005
• Groove Depth: 0.0100 in
• Groove Diameter: 0.2900 in
• Groove Diameter to Shaft Concentricity: 0.0020 in
• Groove Width: 0.0290 in
• Hardness: HR30N 69.5-73
• Illustration: PHL-SH
• Inch or Metric: Inch
• Maximum Thrust Load: 470.0000 Pound-Force
• RPM Limits: 70000 rpm
• Shaft Diameter: 0.3130 in
• Shaft Diameter Fraction: 5/16 in
• Style: Stamped
• Thickness: 0.0250 in
• Clearance Diameter Expanded Over Shaft: 0.5400 in
• Duty: Standard Duty
• Finish (Snap Rings): Phosphate
• Hole Diameter: 0.0410 in
• Hole Diameter Tolerance: +.010/-.002
• Lug Height: 0.0870 in
• Material (Snap Rings): Carbon Spring Steel
• Maximum Section: 0.0400 in
• Minimum Section: 0.0260 in